DIN3352 tahan banting korsi tuang beusi Gerbang klep
DIN3352 tahan banting korsi tuang beusi Gerbang klep
1. Standar: AWWA C515, DIN3352 F4/F5, BS5163, BS5150
2. Tipe: OS & Y, NRS
3. Ukuran: DN50-DN600/2" - 24"
4. Bahan: CI, DI, STAINLESS STAINLESS, Kuningan, Perunggu
5. tekanan: KELAS 125-300/PN10-25/200-300PSI
6.Driving mode: handwheel, gear bevel, gear
PEDARAN
SYARAT Téknis:
● Desain jeung Pabrik luyu jeung EN1171，DIN3352，EN1074
● dimensi Flange saluyu jeung EN1092-2 PN16
● Diménsi Pahareup-hareup luyu jeung EN558-1 Series 14, DIN3202 F5
● Nguji luyu jeung EN12266, ISO5208
● modeu nyetir: roda leungeun, kuadrat Nut
SPESIFIKASI
| No. | Ngaran Bagian | Bahan | |
| 1 | Awak | EN-GJS-500-7 | |
| 2 | Cakram karét | EPDM/NBR+DI. | |
| 3 | Batang Kacang | ZCuAl10Fe3 | |
| 4 | Batang | 1Cr17Ni2 | |
| 5 | Bonét Gasket | EPDM/NBR | |
| 6 | Bonét | EN-GJS-500-7 | |
| 7 | Socket Cap screw | Baja Karbon | |
| 8 | Segel Blok | ZCuZn40Mn3Fe1 | |
| 9 | Roda leungeun | EN-GJS-500-7 | |
| 10 | Nut | Séng-plated Karbon Steel | |
| 11 | Tukang cuci | Séng-plated Karbon Steel | |
| 12 | Dustproof Seal Ring | EPDM/NBR | |
| 13 | O-cingcin | EPDM/NBR | |
| 14 | O-cingcin | EPDM/NBR | |
| 15 | O-cingcin | EPDM/NBR |
F5 data dimensi (mm)
| DN | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 |
| L | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | 390 |
| D | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 | 520 | 580 | 640 | 715 | 840 |
| D1 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 | 470 | 525 | 585 | 650 | 770 |
| D2 | 99 | 118 | 132 | 156 | 184 | 211 | 266 | 319 | 370 | 429 | 480 | 548 | 609 | 720 |
| b | 19 | 19 | 19 | 19 | 19 | 19 | 20 | 22 | 24.5 | 26.5 | 28 | 30 | 31.5 | 36 |
| nd | 4-19 | 4-19 | 8-19 | 8-19 | 8-19 | 8-23 | 12-23 | 12-28 | 12-28 | 16-28 | 16-31 | 20-31 | 20-34 | 20-37 |
| f | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 5 |
| H | 226 | 265 | 288 | 320 | 364 | 410 | 502 | 596 | 681 | 810 | 905 | 1008 | 1135 | 1310 |
| W | 200 | 200 | 200 | 255 | 255 | 306 | 306 | 360 | 360 | 406 | 406 | 508 | 508 | 508 |
F4 Ukuran data (mm)
| DN | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 |
| L | 150 | 170 | 180 | 190 | 200 | 210 | 230 | 250 | 270 | 290 | 310 | 330 | 350 | 390 |
| D | 165 | 185 | 200 | 220 | 250 | 285 | 340 | 405 | 460 | 520 | 580 | 640 | 715 | 840 |
| D1 | 125 | 145 | 160 | 180 | 210 | 240 | 295 | 355 | 410 | 470 | 525 | 585 | 650 | 770 |
| D2 | 99 | 118 | 132 | 156 | 184 | 211 | 266 | 319 | 370 | 429 | 480 | 548 | 609 | 720 |
| b | 19 | 19 | 19 | 19 | 19 | 19 | 20 | 22 | 24.5 | 26.5 | 28 | 30 | 31.5 | 36 |
| nd | 4-19 | 4-19 | 8-19 | 8-19 | 8-19 | 8-23 | 12-23 | 12-28 | 12-28 | 16-28 | 16-31 | 20-31 | 20-34 | 20-37 |
| f | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 4 | 4 | 4 | 5 |
| H | 226 | 265 | 288 | 320 | 364 | 410 | 502 | 596 | 681 | 810 | 905 | 1008 | 1135 | 1310 |
| W | 200 | 200 | 200 | 255 | 255 | 306 | 306 | 360 | 360 | 406 | 406 | 508 | 508 | 508 |
Poin konci Konstruksi sarta Instalasi ngajalin Steel Gate klep
Posisi pamasangan, jangkungna, inlet sareng arah outlet kedah nyumponan sarat desain, sareng sambunganna kedah teguh sareng ketat.
Cecekelan rupa valves manual dipasang dina pipa insulasi teu kudu handap.
Inspeksi visual kudu dilaksanakeun saméméh instalasi klep, sarta nameplate of klep kudu sasuai jeung dibekelan tina standar nasional ayeuna tanda klep umum gb12220.Pikeun klep anu tekanan kerjana langkung ageung tibatan 1.0MPa sareng anu neukteuk pipa utama, uji kakuatan sareng ketang kedah dilaksanakeun sateuacan dipasang, sareng aranjeunna tiasa dianggo ngan saatos mumpuni.
Salila uji kakuatan, tekanan tés kedah 1,5 kali tina tekanan nominal, sareng durasina henteu kirang ti 5 menit.Cangkang klep sareng bungkusan kedah mumpuni upami teu aya bocor.Salila test tightness, tekanan test kudu 1,1 kali tina tekanan nominal;Tekanan tés kedah nyumponan sarat standar GB50243 salami durasi tés, sareng éta mumpuni upami henteu aya bocor dina permukaan sealing disc klep.
